Octave | Onboarding Passport

What name would you like to use for this site?

Please provide the complete street address

Enter the postal code of the site location

Enter the municipality of the site location

Please provide a valid email address

Please provide a valid email address

Name of the Company responsible for the installation of the Edgebox (and Battery Systems)Please share any additional information that may be relevant for your project

The access/contractual offtake power limit of the site. Only relevant in Flanders. This is commonly referred to as the toegangsvermogen in Dutch. Please check the Fluvius portal for the exact value, and provide a value in kW.

The access/contractual injection limit of the site. Only applicable in Flanders.

Please provide a value in kW.

Maximum physical power the site can sustain without tripping any breaker. This is typically set to the nominal power of the transformer.

Please provide the value in kVA.

Current limit at which the breaker of the transformer of the site will trip, if exceeded. For a site with a 3-phase transformer, the current limit [A] of the breaker (Ir) is typically set tot the power [kVA] of the transformer divided by 0.69 [kV].

Please provide a limit in Amperes.

The voltage level of the connection point with the distribution grid. This is required to be able to map the exact distribution tariffs.

Please provide a value in Volts.

Please provide the EAN code that identifies the injection energy meter of the site

Please provide the EAN code that identifies the offtake energy meter of the site

Please select the model of the meter(s) onsite.

If the meter(s) brand/type on site is/are not present in the list you can specify it in the box 'Additional Energy Meters or remarks'

Please provide the IP address of the site meter:

• > IP address (e.g. 192.168.1.5)

If the meter is connected to the Edgebox via RS485, then provide:

• > Baudrate (e.g. 9600)
• > Stopbits (e.g. 1)
• > Parity (e.g. None)

This section is relevant if the site is equipped with additional energy meters or if the site meter is not present in the list of models above.

Please provide details for each additional energy meter including: model (e.g. Socomec Diris A30), IP address (e.g. 192.168.1.20), function (e.g. monitoring production line, or BESS meter for FCR applications) and if willing to, the password of the web interface.

Select the type of Octave controller present on site